PET air conveyor
Transports empty bottles by the neck on an air stream from the blow moulder to the tribloc — no tipping, no contact with the body.
- Output
- up to 36,000 bph
- Container
- PET 0.2–2.0 L
- Design
- Stainless guide rails, filtered air intake
- Sections
- Straight, curved, lifting, variable height
- Control
- VFD fans, back-pressure sensors
- Changeover
- Tool-free guide rail adjustment
Engineering highlights
Buffer against stops
Accumulation is sized so a short stop on one unit does not shut down the whole line.
Variable-speed drives
Every conveyor section has its own drive and back-pressure sensors, synchronised with the filler.
Sanitation by recipe
A CIP station with per-product recipes and control of concentration, temperature and circulation time.
FAQ
Can we buy only conveyors and accumulation for an existing line?
Yes. It is one of the most common upgrades: a line usually misses its rated speed not because of the filler, but because there is no buffer before labelling or packing.
Do we need a separate CIP station if the tribloc has washing built in?
Built-in washing only covers the filler itself. With a mixer, tanks and long piping in the line, a separate station cleans the entire loop to one recipe and documents the process.
Request a quote: EDS-AIR
Tell us the product, the target output and the container — we will return a specification, a layout, a budget range and a delivery schedule.