Flow-meter water filling
Non-contact filling by mass flow meter: the dose is set in the recipe, no mechanical changeover is needed for a new volume.
- Output
- 6,000–24,000 bph
- Container
- PET 0.2–2.0 L
- Filling type
- Electromagnetic flow meter
- Dose accuracy
- ±0.3%
- Volume changeover
- Software only, no valve swap
- Sanitation
- Closed-loop CIP/SIP
Engineering highlights
Gravity filling
Valve with electronic level control, dose tolerance within ±3 mL.
Sanitary design
AISI 304/316L stainless steel, dismountable parts with no dead zones, closed-loop CIP.
Format changeover
Switching from 0.5 L to 1.5 L takes 20–30 minutes with a single operator.
FAQ
Do we need separate water treatment?
Yes — the treatment train is sized against a water analysis report from your well or intake. We build that analysis into the technical brief and include the station in the overall line specification.
How long until the line reaches nameplate capacity?
With a standard configuration, 5–10 working days after SAT: commissioning, operator training and ramp-up to steady output.
Request a quote: EDS-W-FM
Tell us the product, the target output and the container — we will return a specification, a layout, a budget range and a delivery schedule.
Other equipment in Drinking water bottling lines
EDS-W3
3-in-1 water bottling triblock
2,000–12,000 bph
CGF32-32-10
CGF32-32-10 triblock, 15,000 bph
13,000–15,000 bph (500 mL container)
CGF40-40-10
CGF40-40-10 triblock, 18,000 bph
16,000–18,000 bph (500 mL container)
CGF50-50-12
CGF50-50-12 triblock, 20,000 bph
20,000 bph (500 mL container)
CGF60-40-15
CGF60-40-15 triblock, 24,000 bph
24,000 bph (500 mL container)
EDS-W-ION
Alkaline and ionised water line
4,000–15,000 bph
EDS-W-SODA
Soda water bottling line
2,000–18,000 bph
EDS-W-HS
High-speed water bottling line
18,000–36,000 bph
EDS-W-G
Water filling into glass bottles
2,000–12,000 bph
Where this machine is used
Complete lines built around this series, adjacent catalogue sections and the services that deliver them.