3-in-1, 6,000–81,000 bph
The combiblock combines PET blowing, filling and capping in a single frame: no air conveyor, no accumulation of empty containers, a smaller plant footprint and lower risk of secondary contamination. The range covers water, carbonated drinks and hot juice filling — from 6,000 to 81,000 bottles per hour.
Smaller footprint
Up to 30% floor-space savings compared with a separate blow moulder and triblock.
Clean container
The bottle goes straight from the oven to the filler — a rinser is often not needed.
One interface
A single control system for blowing, filling and capping, with a shared cycle and statistics.
3-in-1, 6,000–81,000 bph
A blow moulding and hot-filling unit for juices with pulp particles up to 5 mm.
An automatic blow-fill-cap unit for drinking and mineral water.
Rotary blowing and water filling in a single frame with a shared PLC.
Isobaric CSD filling with counter-pressure right after blowing.
A unit for juice and tea with a heat-resistant bottle and capping at 88 °C.
A production unit for large bottled-water plants.
A complete unit for a 36,000 bph water line with cycle balancing.
Flow-metered filling for soda and carbonated water.
A high-speed unit for juice and cold tea in heat-resistant PET.
Maximum throughput for a plant of national scale.
A unit for soda and carbonated water with flow-metered filling.
A modular combiblock platform for water and juice with a wide container range.
Yes, if its cycle matches labelling and packing. We recalculate the line balance and add a buffer if needed.
Then a separate scheme is better: blow moulder + air conveyor + triblock. A combiblock is tied to its own filling line.
Describe the product, the target output and the container — we will come back with a preliminary specification, a budget range and a delivery schedule. If the task covers more than one machine, we will map out the whole line.
The same machines serve these products — open the product section to see the full line.
See how these machines work inside a complete line, and which engineering services cover the project.
Drinking water bottling lines
10 series: PET and glass, 2,000–36,000 bph
Carbonated soft drink filling
Isobaric filling, carbonation
Juice and pulp drink filling
Hot filling and aseptic
Beer and low-alcohol drink filling
Glass, can, keg
Wine and spirits filling
Inert atmosphere, glass
Dairy product filling
ESL and aseptic
Digital layer
SCADA, MES, OEE monitoring, batch traceability and integration with plant systems — engineered together with the line, not bolted on later.
